-
Stainless steel platter cover for Ishida iPC Series (100 oz, 6 lb, and 15 lb capacity) (RLW-PN 75470)
$29.00
-
Stainless steel platter cover for Ishida iPC Series (30 lb and 60 lb capacity) (RLW-PN 75739)
$29.00
-
Stainless steel weighing pan for HL-i (A&D-PN AX:043008052)
$25.00
-
Stainless steel weighing pan for HT Series (A&D-PN HT-10)
$40.00
-
Stainless steel wheel kit for Defender bases up to 300 lb capacity (OHA-PN 30616409)
$256.00
-
Stand for Counterpart indicator, angled free standing for table top (RLW-PN 121501)
$84.00
-
Standard paper and ink ribbon set, 90 m, for YDP30 (SART-PN 69Y03285)
$106.16
-
Standard thermal paper, 5 rolls of 24 m, for YDP30/YDP40 (SART-PN 69Y03287)
$49.07
-
Star SP742 RS-232 tape printer with cutter (RLW-PN 103142)
$520.00
-
Stat-Pen ionization pen for discharging electrostatically charged samples (SART-PN YSTP01)
$2,847.34
-
Static eliminator, 4 electrodes (A&D-PN AD-1683A)
$1,605.00
-
Static ionizer, ION-100A (OHA-PN 30130302)
$2,660.00
-
Static master (SART-PN U1-69US0094)
$224.00
-
Steel storage case for 10″ (250 mm) diameter low and medium capacity AP Dynamometers (DIL-PN 32224-0011)
$410.00
-
STP-103 compact thermal printer (OHA-PN 80251992)
$1,170.00
-
Subject box (OHA-PN 80000053)
$165.00
-
Sunshade, 8″, for LaserLight3 Remote Display (RLW-PN 208807)
$135.00
-
Suspended infant sling seat trousers (RLW-PN 141444)
$8.00
-
SW indicator for SW Series (A&D-PN SW-DF)
$820.00
-
Swivel/lock caster for 30 lb and below capacities (each), for FG-K, HW-C/P, and HV-CWP Series (A&D-PN HVW-16SSC)
$70.00
-
Swivel/lock caster for above 30 lb capacities (each), for FG-K, HW-C/P, and HV-CWP Series (A&D-PN HVW-17LSC)
$85.00
-
Syringe Holder designed to hold analytical glass syringes and plastic syringes (typically used for in vivo applications), for Cubis II, for use without automated or manual inner draft shield (SART-PN YSH46-3)
$982.52
-
Tabletop breeze break (A&D-PN AD-1672)
$2,645.00
-
Temperature calibration disk for MA Series (SART-PN YTM15MA)
$1,572.51
-
Temperature calibration kit (OHA-PN 11113857)
$905.00
-
Temperature calibrator, for MS-70 & MX-50 only (A&D-PN AX-43)
$595.00
-
Test tube kit, 310-00, 311-00 (OHA-PN 80780018)
$64.00
-
Thermal printer head assembly, bRite (OHA-PN 72253293)
$1,112.00
-
Titanium holder for coronary stents up to 38 mm, for semi-micro and analytical balances (SART-PN YSH10)
$1,356.41
-
Titanium holder for filters, 150 mm, for semi-micro and analytical balances (SART-PN YSH30)
$1,771.18
-
Titanium holder for save-lock tubes up to 5 ml, for semi-micro and analytical balances (SART-PN YSH19)
$713.40
-
Titanium holder for save-lock tubes, 1.5 ml – 2 ml, for semi-micro and analytical balances (SART-PN YSH13)
$580.86
-
Titanium holder for save-lock tubes, 1.5 ml – 2 ml, for semi-micro and analytical balances (SART-PN YSH15)
$791.43
-
Titanium holder for syringes, vertical – for semi-micro and analytical balances (SART-PN YSH46)
$1,244.31
-
Titanium holder for titration vessels and round bottom flasks – for semi-micro and analytical balances (SART-PN YSH37)
$971.91
-
Titanium holder for vials – for semi-micro and analytical balances (SART-PN YSH23)
$998.76
-
Titanium holder for weighing boats – for semi-micro and analytical balances (SART-PN YSH26)
$1,011.52
-
Tong assembly, 24cm x 7.5cm, with surgical tubing on ends (RLW-PN 50000)
$78.00
-
Tongs for removing pans (SART-PN YST01MA)
$65.47
-
TranSend MSI-7000 Wireless Load Cell Interface System, four channel receiver to provide an analog output signal: 4-20 mA, 0-20 mA, 0-5 VDC, 0-10 VDC, ±5 VDC, ±10 VDC, includes three coil relays, RF 802.15.4, 2.4 GHz, 5-6 VDC power input (RLW-PN 160016)
$1,400.00
