Dillon AWT05-100370 Quick-Check-T Tension Meter, 10,000 lbf

Item #AWT05-100370

Be the first to review this product

Availability: In stock

$5,550.00
Accessories
  • Additional calibrations at time of order (DIL-PN DILLONCAL-QC) (PN DILLONCAL-QC) SKU: DILLONCAL-QC $110.00
Overview

  • Bluetooth enabled

  • Custom mobile app - Dillon Tower (Android/iOS mobile device not included)

  • Multi-wire single sheave

  • Calibration check rod

  • Automatic closeout report generation with photos

  • Automatic target tension calculations

  • Ability to capture pre- and post-tension readings

  • Inbuilt image capture

Dillon AWT05-100370 Quick-Check-T Tension Meter, 10,000 lbf

Details

The Dillon Quick Check-T tension meter makes a difference. It reduces time on the job site by eliminating the need for whiteboards, changing sheaves, and the need for charts to figure out target tensions. This unit also reduces time off of the job site by having automatic site form completion, with image, and direct complete reports.

Capacity 10,000 lb / 45 kN / 4500 kg
Range Wire sizes from 3/16" through 1" (4.75 mm through 25.4 mm)
Communications Bluetooth
Wire Calibrations Up to 20 wire calibrations
Units of Measure lbf, kgf, newtons
Capture Rate 10 Hz, 100 Hz, and 1000 Hz
Resolution Low / Medium / High (5000 resolutions)
Accuracy ± 3% of instrument capacity (calibrated to specific wire size and type)
Data Export Via mobile app
Battery Two "C" batteries
Operating Range -4°F to 158°F (-20°C to 70°C)
Display Dot graphic LCD display supports full text
Calibration Each wire rope calibration is traceable to the National Institute of Standards and Technology. Certificate included with curve readings. Passes only with three consecutive confirming runs, with all points in specification.
Protection Hard polymer storage case included
Environmental Suitable for continued outdoor use
Size 10" x 23" x 3" (25 cm x 59 cm x 8 cm)
Weight Approximately 11 lb (5 kg)
Recalibration Every 12 months
Approved By Majority of cell tower owners
Included Tension meter, multi-wire single sheave, calibration check rod, cable gauge, batteries, and rugged carry case

Write Your Own Review

You're reviewing: Dillon AWT05-100370 Quick-Check-T Tension Meter, 10,000 lbf

Downloads