Details
The MSI-4260M Port-A-Weigh crane scale has an established reputation as the industry standard in medium to heavy-capacity overhead weighing and duty-cycle needs. With a proven mechanical design and advanced electronics, the MSI-4260M is versatile, reliable, accurate and user friendly. The MSI-4260M is designed to meet or exceed requirements of applicable ASME, ANSI, OSHA safety standards.
| Capacity x Resolution | 30,000 lb x 10 lb (15,000 kg x 5 kg) |
|---|---|
| Accuracy | ± 0.1% + 1d of applied load |
| Resolution |
Max NTEP Approved Class III: 2,500 divisions Max NTEP Approved Class IIIL: 5,000 divisions Max Non-NTEP Approved: 10,000 divisions |
| Enclosure | IP66 cast aluminum |
| Lifting Eye, Link & Hook | Crosby or equal with 360° thrust-bearing swivel hook |
| Design Overload | 200% safe / 500% ultimate |
| Functions |
Power: Turns unit ON or OFF Zero: Zeros applied load up to 100% of capacity (limited range in NTEP configuration) Tare: Tares applied load and displays weight in Net mode User: Programmable as test, total, unit, peak hold, net/gross, view total and print |
| Display | Five-digit, 1.75" (44.5 mm) LCD with programmable brightness control |
| Displayable Units | Pounds or kilograms selectable |
| Annunciators | COZ, Battery Level, Net, Total, lb/kg, Stability, RF and Setpoint LEDs |
| Power | 12 volt rechargeable battery (115/230 VAC battery charger is included) |
| Operating Time | Up to 250 hours between charging with typical use, less with RF Modem option |
| Temperature Range |
Certified: 14°F to 104°F (-10°C to 40°C) Operating: -20°F to 122°F (-28°C to 50°C) |
| Auto-Off Mode | Powers off after the scale is not used for the set time (in minutes) 15, 30, 45, 60 or OFF selectable |
| Auto Sleep Mode | Powers down during non-use after the set time (in minutes) and powers up with weight change or any key press; 5, 15, 30 or OFF selectable |
| Service Counters | Counts number of lifts over percentage of capacity and lifts over capacity |
| Calibration | Digital (procedure initiated by calibration switch) |
| Filtering | OFF, LO, HI-1, HI-2 selectable |
| Warranty | One year limited |
| Approvals | NTEP COC 19-122 |
